Double Tube | Aluminum Screw Cover Head

Double Tube right angle thermocouples utilize two protection tubes. They can be a combination of metal and ceramic tubes. They are used to monitor temperatures for heat treating, salt baths, casting, or hot dip galvanizing.  A variety of high temperature alloys can be used for the metal tube.  An elbow also connects the hot and cold legs of the assembly. This right angle construction is very useful. It keeps the thermocouple connection head away from radiated heat from the process. Angle thermocouples also help avoid contact with covers above the process.

Specifications | Advantages

  • Double Protection Tube
  • Metal with Ceramic Protection Tube Hot Leg
  • Right Angle Construction
  • Standard Aluminum Screw Cover Head
  • Type K, E, J, or N Thermocouple Elements
  • Large 8 Gauge wire
  • Ceramic Insulated Elements
  • All Specialty Alloys Available From Stock

Example: Angle Thermocouple Assembly part number 8K6-1012XH-12-18-SH signifies an 8 gauge element, Type K Calibration, angle assembly, 12" long hot leg made from 1/2" extra Heavy #10 alloy pipe (32% nickel, 21% chromium). The 18" long cold leg made from a steel balance pipe, and a standard weatherproof aluminum head.

Other combinations of thermocouples and protection tubes can also be specified depending on your application.

NOTE: If you would like to order a Type E, J, or N assembly, substitute the K with an E, J, or N, in the part numbers listed on this page.

p73 AngleDouble Tube Pub 20171108-1
p72 Angle Double Tube Pub 20171108-2