Heater Ribbon

Resistance Ribbon Type - A | Resistance Ribbon Type - C

Heater Ribbon

Nichrome Ribbon Types

The Arklay S. Richards Co., Inc. offers two types of resistance heating ribbon. The Richards NRA or Type A resistance heating ribbon is composed of 80% Nickel and 20% Chromium. The Type A has a lower temperature coefficient of resistance when compared to the Type C resistance ribbon. The Type A resistance ribbon has a usable temperature range up to 1150°C or 2100°F.

Composition

Richards NRC or Type C resistance heating ribbon is composed of 60% Nickel, 16% Chromium, and the balance of 24% Iron. Type C ribbon has a usable temperature range up to 1000°C or 1850°F. It also has a higher coefficient of resistance when compared to the Type A. Both types of ribbon have excellent corrosion resistance.

Applications

The Type C ribbon is very useful in applications where a high resistance is required within a limited space. In heating and technical applications, the Type A ribbon is most commonly used. The Type A and Type C resistance ribbon are both offered in large or small spool sizes.

Specifications

  • Type A and Type C Alloys
  • High Electrical Resistance
  • Excellent Corrosion Resistance
  • Available in thicknesses from .002" to .102"
  • Available in widths from 1/64" to 1.0"

Resistance Table for Type A Ribbon

Nichrome A Ribbon Part Number Example: Part number is NRA then Code 1 then Code 2  NRA0424 has Code 1 as number 04 (thickness of .072") and code 2 has number 24 or (width of 3/8")

[table id=6 /]

Resistance Table for Type C Ribbon

Nichrome C Ribbon Part Number Example: Part number is NRA then Code 1 then Code 2  NRC0424 has Code 1 as number 04 (thickness of .072") and code 2 has number 24 or (width of 3/8")

[table id=7 /]

Accessories and Related Products

Heater Ribbon

Resistance Heater Ribbon Specifications

Heater Ribbon Type Resistivity Ohms/Sq Mil Foot Density
Type A 510 Ohms/Square mil foot at 68°F .3039 Lbs/Ci
Type C 530 Ohms/Square mil foot at 68°F .2979 Lbs/Ci

Heater Wire