Cable

Wind Sensor Cables

When installing your wind monitoring system, it is very important that the proper wires be used for the wind sensors and connected electronics. Our wind sensor signal and power cables will insure that your wind instruments are functioning at peak performance and the signal quality is maintained for accurate data.

Two Conductor Cables for Anemometers

Anemometer Signal Cable number 20I01-PP-S-SD-DW has two conductors. It is perfect for wiring unheated C5 or C5C Series Anemometers to dataloggers, our A-490 Wind Monitors, or our LW-1261-C wind speed displays. Spool and cut to your length requirements. Construction: 20 gauge, stranded, twisted single pair, Black, White, shielded with drain wire, UL, and Black PVC outer jacket

Anemometer Signal Cable number 22I01-PP-S-TW has two conductors. It is perfect for wiring unheated C5 or C5C Series Anemometers to loggers, our A-490 Wind Monitors, or our LW-1261-C wind speed displays. Spool and cut to your length requirements. Construction: 22 gauge, stranded, twisted single pair, Black, White, UL, and Black PVC outer jacket

Anemometer Signal Cable number 20I01-AU-S is perfect for cold weather applications. This special cable is a high performance Arctic grade wire able to work in extreme temperature ranges of -55°C to 105°C. This highly flexible wire combines two conductors, finely stranded copper construction with a jacket material that resists the abuses of oil, gasoline, sunlight, salt water, acids, and chemicals. This cable is perfect for wiring unheated C5 or C5C Series Anemometers to loggers, our A-490 Wind Monitors, or our LW-1261-C wind speed displays. Spool and cut to your length requirements. Construction: 20 gauge, stranded, single pair, Black, White, and a Green Arctic Ultra Flex outer jacket

Three Conductor Cables for Wind Vanes

Wind Vane Signal Cable number 20I03S-PP-S-SW-DW has three conductors. It is perfect for wiring unheated D5 or D5C Series Wind Vanes to loggers or our LW-1261-D wind direction displays. Spool and cut to your length requirements. Construction: 20 gauge, stranded, twisted three single conductors, Black, White, Green, shielded with drain wire, UL, and Black PVC outer jacket

Wind Vane Signal Cable number 22I03S-PP-S-TW- has three conductors. It is perfect for wiring unheated D5 or D5C Series Wind Vanes to loggers or our LW-1261-D wind direction displays. Spool and cut to your length requirements. Construction: 22 gauge, stranded, twisted three single conductors, Black, White, Green, UL, and Black PVC outer jacket

Wind Vane Signal Cable number 20I03-AU-S is for cold weather applications. This high performance Arctic grade wire able to work in extreme temperature ranges of -55°C to 105°C. This highly flexible wire combines three conductors, finely stranded copper construction with a jacket material that resists the abuses of oil, gasoline, sunlight, salt water, acids, and chemicals. It is perfect for wiring unheated D5 or D5C Series Wind Vanes to loggers or our LW-1261-D wind direction displays. Spool and cut to your length requirements. Construction: 20 gauge, stranded, three single conductors, Black, White, Red, and Blue Arctic Ultra Flex outer jacket

Two Conductor Cables for Wind Sensor Heating Elements

Power Cable for wind sensor heating elements number 20I01H-PP-S-SD-DW has two conductors. This cable is for wiring wind sensor heater elements on heated Richards C5 or C5C Series Anemometers and D5 and D5C Wind Direction Vanes. Spool and cut to your length requirements. Construction: 20 gauge, stranded, twisted single pair, Red, Black, shielded with drain wire, UL, and Black PVC outer jacket